The ConsoleNintendo3DS connection has internet, and sends packets (although nowhere near as many as when it's working properly), but doesn't receive any. When going through the make process, I get the following output: [email protected]:~/rt2870/2008_0925_RT2870_Linux_STA_WebUI_v188.8.131.52/RT2870$ sudo make make -C tools make: Entering directory `/home/andy/rt2870/2008_0925_RT2870_Linux_STA_WebUI_v184.108.40.206/RT2870/tools' gcc -g bin2h.c -o bin2h make: Leaving directory `/home/andy/rt2870/2008_0925_RT2870_Linux_STA_WebUI_v220.127.116.11/RT2870/tools' /andy/rt2870/2008_0925_RT2870_Linux_STA_WebUI_v18.104.22.168/RT2870/tools/bin2h I've used this with success on a computer with my Dlink DWA-140, however I now need it on another computer. I run Ubuntu 8.04 X64. have a peek at this web-site
I could only wish lol. With ndiswrapper, did you try with all the available Windows drivers (For Windows Vista, XP, 2000, etc)? Press F10 to save changes and exit. When I look at "hardware drivers" under the system administration menu it shows the RT2870 driver as being installed, lsusb shows that the device is a RT2870 adaptor, but ifconfig ra0
Ask the community! note: These default IP addresses, names and passwords are provided for informational purposes only and might not work with your router model. Step 6: Other things to try If your computer is still experiencing Wi-Fi connection or performance problems, one of the following sections might help resolve the issue. No Streetpasses yet and I don't receive any packets when my 3DS is closed unless I open it.
If this information does not allow you to log in to your router's setup page, refer to the User Guide that came with your router. I'm not sure how I received those packets.. Like I mentioned earlier, I could get some functionality with the XP/2000 drivers but none with Vista; maybe under a different Windows driver you'll be able to satisfactorily use ndiswrapper with Windows 10 Network Drivers Select Yes to confirm.
It is a problem with the hosted network. That was quick. If anyone have news about this issue I would be pleased to listen about it :D . Until the, best of luck to you! :) Jackie999September 1st, 2008, 01:27 AMThanks ...who knows..I may be back on Hardy by tomorrow :) The driver doesn't even compile under Fedora ...so
Let me know if you want to combine on trying to get a fix for it. Windows 10 Can't Find Wifi Thread Status: Not open for further replies. Use up or down arrow keys to select Restore Factory Settings as Default. Newcomer NuttyS Advanced Member Joined: Apr 30, 2015 Messages: 67 Location: Reading, UK Country: DrakeLyon said: ↑ Hmm, that's weird.
The readme says I should tell it about GCC and LD, but I'm not sure what to tell it? aextanceOctober 7th, 2008, 09:46 PMI'm about to try the new September Ralink driver, but Nutt's problem looks similar to what I got when I tried to make without changing the make No Wifi Windows 10 thor240zOctober 23rd, 2008, 09:26 PMI'm running on Hardy, and I'm fairly certain I have the driver installed properly as per the directions earlier in the thread. Windows 10 Internet Connection Issues So, in fact with "-rt" kernels the problem seems to come regularly, and I found the post of someone with the same warning during the installation of his webcam.
Figure : Wireless adapter driver provider Visit the driver provider's website to look for an updated driver. Check This Out Again, thank you very much :D . In my case, I got my connection up by manually configuring the connection settings for one specific network (my home network). Update the router firmware to troubleshoot a network connection Outdated firmware might affect performance, security, or prevent the router from accessing the Internet or certain webpages. Windows 10 Wifi Connected But No Internet
Any other thoughts/suggestions? Some are supported out of the box by the current kernels, and some aren't. Plug it in, configure wireless. http://wcsonline.org/windows-10/windows-10-can-39-t-find-wifi.html The computer reinstalls wireless network and the wireless network adapter name is shown in the Network adapters category.
Click Connect. Connect Network For Inmates irda0 no wireless extensions. When going through the make process, I get the following output: [email protected]:~/rt2870/2008_0925_RT2870_Linux_STA_WebUI_v22.214.171.124/RT2870$ sudo make make -C tools make: Entering directory `/home/andy/rt2870/2008_0925_RT2870_Linux_STA_WebUI_v126.96.36.199/RT2870/tools' gcc -g bin2h.c -o bin2h make: Leaving directory `/home/andy/rt2870/2008_0925_RT2870_Linux_STA_WebUI_v188.8.131.52/RT2870/tools' /andy/rt2870/2008_0925_RT2870_Linux_STA_WebUI_v184.108.40.206/RT2870/tools/bin2h
The problem I'm having is that in the Network Manager, it detects the networks in the area, but won't connect to them. Either you're posting in the wrong thread or you didn't pay much attention to what's going on here. :) Ralink is a manufacturer, they make lots of chipsets. Step 1: Use automatic troubleshooting Tools by HP or Microsoft can be used to automatically test for and fix a large variety of wireless conditions. Windows 10 Wifi Driver Member DrakeLyon Console Perfectionist Joined: Sep 15, 2015 Messages: 286 Location: Alabama Country: NuttyS said: ↑ Diagnosing doesn't do anything for me as it doesn't detect any problems.
GepettoBROctober 23rd, 2008, 08:17 PMRALink chipset supported in Hardy. How does HP install software and gather data? ndiswrapper) didn't seem worthwhile..I figured my time was better spent trying distros. have a peek here Bus 003 Device 001: ID 0000:0000 Bus 002 Device 002: ID 1784:0008 Bus 002 Device 001: ID 0000:0000 Bus 001 Device 004: ID 14b2:3c23 Atheros Communications Inc Bus 001 Device 001:
Didnt know about the rtutil thing, though the driver comes with the equivalent utility on my hackintosh partition ;-) My guess is the problems are probably a combination of the badly This is exactly what happened to me. Click Possible Root Causes. Use Windows 7 Network and Internet Troubleshooter The Windows 7 Network and Internet Troubleshooter tests the network for problems and attempts automatic repairs for any issues found.
Hope this helps, Paulo GepettoBRNovember 5th, 2008, 04:14 PMThere's a firmware update at the Ralink page, does anyone know how I can go about applying it? My conclusion is that it's a Network Manager problem. I own a HP HDX 18 notebook (Model no: X18-1101EA), and am having problems with the wireless adapter. I guess that ndiswrapper doesn't handle this Vista 64 driver very well.
I have spotted something with yours though, it's showing as a public network, have you tried changing it to private and running the program? If you are using a notebook computer, perform a hard reset at this time. Could somebody let me know if there are changes I need to make in /etc/network/interface or /etc/modules - or should the 'make install' have made changes (mine didn't) Thanks. I believe ifconfig ra0 up will also do the trick - just copied $/sbin/ifconfig ra0 inet YOUR_IP up from the readme :p negoraApril 25th, 2008, 06:35 PMYou've done my day!!! :D
GepettoBROctober 20th, 2008, 05:35 PMAs promised, here are the instructions for installing the Ralink rt2870 driver version 220.127.116.11 on kernel version 2.6.27-7-generic (on the Ubuntu 8.10 Intrepid Ibex beta): 1)Download the Done. GepettoBRJanuary 3rd, 2009, 09:17 PMHi, Gepettobr In the common directory of the drivers (18.104.22.168) exist a file called rt2870.bin. Should replace it?